Steel pipes are among the most widely used products in industrial, construction, and mechanical projects due to their mechanical strength, ability to withstand high pressures and temperatures, and reliable durability.

Atlas Pars Sanei supplies a range of black and galvanized steel pipes for water-supply systems, oil and gas transmission lines, refineries, petrochemical facilities, mechanical installations, boiler manufacturing, and HVAC systems. The pipe type, diameter, wall thickness, and technical specifications are selected according to the operating conditions and requirements of each project.

Pipe fittings are used to connect pipes, change the direction of flow, create branches, and transition between different pipe diameters. They play an essential role in the safety and reliable operation of piping systems.

These products are available in threaded and welded configurations. Galvanized threaded fittings are commonly used in cold- and hot-water systems, while welded fittings are widely used in industrial and mechanical piping installations. The appropriate fitting should be selected based on the pipe material and diameter, operating pressure and temperature, type of fluid, and installation method.

A pump is a mechanical device that converts mechanical energy into hydraulic energy, increasing the pressure or head required to transfer a liquid from one point to another.

Atlas Pars Sanei supplies submersible, turbine, agricultural, and domestic pumps according to project requirements. Selecting the appropriate pump depends on factors such as the required flow rate, pumping head, operating pressure, type of liquid, and installation conditions. The company also provides installation, commissioning, and repair services for various types of pumps.

Steel hollow sections and profiles are widely used in construction, industrial, and civil-engineering projects. These products are manufactured in various shapes, dimensions, and thicknesses for applications such as steel structures, industrial buildings, frames, machinery, and engineered components.

Square and rectangular hollow sections, as well as open and closed steel profiles, can be supplied according to the drawings and technical specifications of each project. Selecting the appropriate dimensions, wall thickness, and steel grade directly affects the strength, weight, and overall performance of the finished structure.

An electric motor is an electromechanical device that converts electrical energy into mechanical energy, generally in the form of rotational motion. Its rotating component is known as the rotor, while the stationary component is called the stator.

Atlas Pars Sanei supplies single-phase and three-phase electric motors for pumps, agricultural equipment, industrial machinery, and mechanical systems. Power output, rotational speed, torque, voltage, protection rating, and mounting configuration are among the main factors considered when selecting an electric motor.

Construction reinforcing bars are used to compensate for concrete’s relatively low tensile strength and improve the overall performance of reinforced-concrete structures. The ribs formed on the surface of reinforcing bars provide a stronger bond between the steel and concrete.

Depending on their chemical composition and mechanical properties, alloy steel bars are also used in the manufacture of industrial components and equipment. Atlas Pars Sanei supplies construction and alloy reinforcing bars in various diameters, grades, and technical specifications according to applicable standards and project requirements.

Valves are used to start or stop flow, regulate pressure and flow rate, change the direction of a fluid, and prevent backflow within piping systems. Ball, gate, needle, butterfly, and check valves are among the most commonly used types in industrial and mechanical applications.

Valves may be manufactured from cast iron, brass, bronze, carbon steel, alloy steel, or stainless steel. The appropriate valve type and material should be selected according to the fluid, operating pressure and temperature, environmental conditions, and connection method. Valves may be operated manually or automatically using an actuator.

ST37 steel, also known as black steel or carbon steel sheet, is one of the most widely used steel products in construction and industrial projects. Its strength, formability, and weldability make it a practical material for manufacturing steel structures and components.

ST37 steel sheets and plates are used in buildings, industrial sheds, storage tanks, machinery, bridges, industrial equipment, and petrochemical projects. Depending on their thickness and the manufacturer’s specifications, these products are available in coils, mill-cut sheets, or cut-to-size formats and can be prepared according to the dimensions required for each project.